H12-321 Huawei Certified Network Professional – Wireless Local Area Network- Constructing Enterprise WLAN Architecture

2.1 Exam Content
HCNP-WLAN-CEWA exam includes but not limited to the following: Large-Scale WLANs, WLAN Radio Management, WLAN WIDS, Deployment of WLAN Secure Connectivity Services, Interconnecting the Agile Controller-Campus with Servers, WLAN Inter-AC Roaming, High WLAN Reliability, Building a Wireless Mesh Network.

2.2 Contents

21% I. Building a Foundation Enterprise WLAN
1). Introduction to Large-Scale WLANs, include Typical Applications of a Large-Scale WLAN Campus Network, AP Go-Online Process and Configuration, VLAN Pool Introduction, Large-Scale WLAN Introduction, Configuration Example of a Large-Scale WLAN, Maintenance of Basic WLAN Services.
2).Introduction to WLAN Radio Management, include Introduction to WLAN Radio Management, Radio Calibration, Load Balancing, Band Steering, User CAC, Smooth Channel Switching, Automatic Per Packet Power Adjustment.

29% II. Building a Security Enterprise WLAN
1). Introduction to WLAN WIDS, include Introduction to WLAN WIDS, Principles for Monitoring and Countering Rogue Devices, Wireless Attack Detection and Prevention Methods, Basic WIDS Configuration, Typical Application Scenarios.
2). Deployment of WLAN Secure Connectivity Services, include WLAN Access Authentication, Introduction to the Agile Controller, Typical Configuration of the Agile Controller.
3). Interconnecting the Agile Controller-Campus with Servers, include Deploying the Agile Controller in large networks, Directory server, Interconnecting the Agile Controller with external sources, Application in wireless authentication.

12% III. Building a Movable Enterprise WLAN
1). WLAN Inter-AC Roaming, include Basic Concepts of Roaming, Different Roaming Modes, Implementation of Inter-AC Roaming, Application Scenarios of Roaming, Layer 3 Roaming Configuration.
2). WLAN Smart Roaming, include Overview of Smart Roaming, Applications of Smart Roaming, Process of Smart Roaming, Configuration Example of Smart Roaming.

15% IV. Building a Reliable Enterprise WLAN
1). WLAN Dual-Link Backup, include Overview of WLAN Availability, Introduction to WLAN Dual-Link Backup, Introduction to WLAN N+1 Backup.
2). WLAN Hot-Standby Backup, include Overview of HSB, Principles of HSB, Main Application Scenarios of HSB, Configuration of HSB.

23% V. Building an Internet Enterprise WLAN
1). Deployment of Huawei Outdoor Aps, include Outdoor WLAN Deployment Scenarios, WLAN Outdoor Coverage, Fresnel Zones.
2). Huawei Outdoor APs and Antennas, include Huawei Outdoor Aps, Huawei Antennas, Antenna Selection.
3). Building a Wireless Mesh Network, include Mesh Background, Mesh Basic Concepts, Mesh Architecture, Mesh Establishment, Typical Mesh Application Scenarios, Typical Mesh Configuration Examples.

QUESTION 1
In Layer 3 roaming, STAs roam from one AP to another AP, and the service VLANs of the corresponding VAPs change.
After roaming, data packets of the STAs are sent to the service VLAN of the AP to which STAs roam.

A. TRUE
B. FALSE

Answer: B

QUESTION 2
Which of the following statements about precautions for HSB configuration is FALSE?

A. When configuring dual-link HSB, you need to run the commit command on the active AC to deliver the configuration to APs after completing service configurations on both the active and standby ACs.
B. When configuring dual-link HSB, you need to run the commit command on the active AC to deliver the configuration to APs after completing service configurations on the active AC. Then perform configurations on the standby AC.
C. When configuring dual-link HSB, ensure that active and standby ACs deliver the same WLAN service configuration to an AP. If the configurations are inconsistent, the AP may not work properly after an active/standby switchover
between ACs.
D. During an active/standby switchover between two ACs, services forwarded through the tunnel may be interrupted because the switchover takes a long time. New users cannot go online and online users cannot roam between APs.

Answer: B

QUESTION 3
In the figure, transparent transmission of STP packets may cause mutual impact between bops. To prevent the impact, which statement about STP is TRUE?

A. STP needs to be enabled on only MPP’s wired interfaces.
B. STP needs to be enabled on only MP3’s wired interfaces.
C. STP needs to be enabled on the wired interfaces of both MPP and MP3.
D. STP needs to be enabled on MP1 and MP2.

Answer: C

QUESTION 4
The Agile Controller fails to connect to the AD server during the configuration of the Agile Controller. The AD server IP
address and synchronization account and password are all correct, and no additional configuration is performed for the
AD server. The configuration is shown in the following figure. What causes the connection failure? (Multiple Choice)

A. Incorrect synchronization type
B. Incorrect authentication source name
C. Incorrect port number
D. Incorrect base DN r SSL is disabled

Answer: C D

QUESTION 5
Which roles belong to a Mesh network? (Multiple Choice)

A. MP
B. MPP
C. MAP
D. VAP

Answer: A B C

Click here to view complete Q&A of H12-321 exam
Certkingdom Review
, Certkingdom PDF Torrents

MCTS Training, MCITP Trainnig

Best Huawei H12-321 Certification, Huawei H12-321 Training at certkingdom.com

Click to rate this post!
[Total: 0 Average: 0]

About the author /


Archives

Latest

+

Random

+
November 2018
M T W T F S S
 1234
567891011
12131415161718
19202122232425
2627282930